HY-6000 rotating equipment monitoring and protecting device is used in power, steel and iron, building material, chemical industry, monitoring and measuring rotating equipment bearing vibration (absolute vibration), shaft vibration (relative vibration), axial displacement, differential expansion, eccentricity, synchronizer, start-up valve, reciprocating cylinder, heat expansion, oil level and oil temperature, it is convenient for doing analysis and maintenance for equipment conditions. The device will alarm once it measures abnormal value, and protects running equipments in time, client will avoid unnecessary economic loss. The device uses high performance on-off power supply, add high and low pass filter and isolated gate, improved capacity of resisting disturbance dramatically, performance stable, safe and reliability; cost performance ratio is high.

1. Highly Intelligent, all parameters can be set on a control panel.
2. Suitable for on-line monitoring for a long time, easy to install and debug, needing no site maintenance
3. With
modular structure, each module has a microprocessor, the system can be
estabilished by any combination, the system reliability is improved.
4. Each module has a 2rd level alarm switch.
5. 4～20mA current analog output.
6. Real time TDM signals output.
7. Free configurations of measuring range, alarm and danger value.
8. can memorize and display maximum

1. Measuring range:
        Vibration channel measuring range
                Amplitude:0～500μm（P-P value）;
                severity:0～50.0mm/s（RMS）;
        Axial displacement measuring range 
                -1.00～1.00mm(used CWY-DO-Φ8 proximity sensor)
                -2.00～2.00mm(used CWY-DO-Φ11 proximity sensor)
        Differential expansion measuring range
                -3.00～5.00mm(used CWY-DO-Φ18 proximity sensor)
                -4.00～6.00mm(used CWY-DO-Φ25 proximity sensor)
        Stroke(reciprocating cylinder, heat expansion, power limiter, synchronizer, active valve, oil level of oil tank)measuring range
                reciprocating cylinder:0～150mm,0～200mm,0～250mm
                heat expansion:0～35mm
                power limiter, synchronizer, active valve:0～25mm
                oil level of oil tank:-200～200mm,-300～300mm,-400～400mm
        Speed measuring range
                0～9999rpm
        Temperature measuring range(set according to temperature sensor)
                0～400℃
2. Measurement accuracy: 0.5, linear error≤±0.5%;
3. Display model: LED display or LCD display;
4. Signal output:
        a. currency output: 4～20mA (in full scale range, resistance≤850Ω);
        b. TDM real time signal output (can analyze waveform);
        c. RS485 signal output;
        d. on-off output: two on-off outputs for each channel (AC250V/5A, DC27V/2A);
7. Environmental temperature: -15℃~65℃ (relative humidity≤80％);
8. Input voltage: AC 85V～265V or DC 120V～370V;
9. Installation
HY-6000 is installed in panel or local protecting box according to requirement of customer, we can supply local device box with glass door and window.
Overall size:(40.0×device position＋58mm)×161.5mm×260mm(length×width×depth);
Hole dimension:(40.0×device position＋27mm)×140mm (length×width);